2009-10-08_0000-00-00 00:00:00 Teknoloji - DUNYAMIZ - Blogcu








20/4/2009

Ultrasonic concentration measurement

h1

Ultrasonic concentration measurement
The process analyser PIOX® S determines the concentration or the density of liquids or further process quantities using ultrasounds. The sound velocity of the liquid is the primarily measured quantity for this task.
PIOX® S can be used to control the concentration of solutions or to monitor chemical reactions such as polymerization, crystallization, neutralization processes, phase separation processes, etc.

Through quality control or product detection, PIOX® can help you to reach higher quality and to optimize your process. Thanks to the continuous control of the process parameters, the periodical controls and spot tests belong to the past. The process can be controlled exactly, in case of the deviations from the target quantities, an immediate reaction is possible. A higher product quality is reached and the material, time and energy consumption is reduced.

The measurement can take place with wetted transducers or with non-intrusive clamp-on transducers. The clamp-on technology is ideal for the measurement of chemically aggressive, corrosive or ultrapure media.

20/4/2009

Add Scanning Capabilites to Your Huntron Tracker Model 30 System

h1

Add Scanning Capabilites to Your Huntron Tracker Model 30 System adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins. Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.Scanner II and Scaner 31S users may want to consider these. Optional Accessories to enhance their test capabilities.
Highlights:Desing By kuzey....
The Scanner II and Scanner
31S accessories add scanning capability to the Tracker Model 30
All Scanners
have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when
the A and B channels are combined
The Scanner 31S use standard IDC style
connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number
of test pins
Selecting Accessories for your Scanner IIThe Scanner II
accessories for interfacing to your printed circuit board come "ala carte". This
means that you select the accessories you want included with your Scanner.
Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter
required with Scanner II) or a mutli-pin breakout cable. Details on these
accessories are provided on this page.

20/4/2009

ASC process systems

h1


ASC is a leading manufacturer of specialized process equipment, control systems, and custom manufacturing software used in the composites, plastics, glass, solar, lumber, and concrete, coatings, and finishing industries. Our product lines include composite autoclaves, glass-laminating autoclaves, concrete autoclaves, industrial ovens, composite ovens, electroplating automation systems, process control software, autoclave control software, oven control software, and crane and hoist control software including scheduling. We're located in Los Angeles, CA and support thousands oAutoclaves and other equipmentASC manufactures a range of process equipment, including autoclaves, ovens, presses, heating systems, cooling systems, vacuum systems, and specialty pressure equipment. We also buy and sell used equipment.systems and hundreds of customers wControl & power systemsASC is a leading supplier of control and power systems for a wide variety of equipment and industries. We specialize in PC-based and PLC-based control solutions. Our PC-based systems typically feature our industry-standard CPC control software package.orldwide.Software for controls and manufacturingASC can develop custom software solutions for a wide variety of manufacturing applications. Our CPC software is the world's leading software for control of autoclaves, ovens, and many other applications. Our FLEXTIME software is also the leading PC-based solution for electro-plating and anodizing control

12/4/2009

KYC compliance

h1

Know Your Customer (KYC) compliance regulation has proved to be one of the biggest operational challenges banks, accountants, lawyers and similar financial service providers worldwide have had to overcome.

World-Check, the industry standard KYC compliance solution, provides an overview of KYC compliance and its origins, and outlines the compliance mandate as applicable to banks, accounting firms, lawyers and other regulated financial service providers – not just in the UK, Europe and the USA, but all around the world. Relied upon by more than 3,000 institutions worldwide, this KYC database solution provides effective legal and reputational risk reduction.

Why “Know Your Customer?”


The 9/11 terrorist attacks on the World Trade Centre revealed that there were sinister forces at work around the world, and that terrorists activities were being funded with laundered money, the proceeds of illicit activities such as narcotics and human trafficking, fraud and organised crime. Overnight, the combating of terrorist financing became a priority on the international agenda.

For the financial services provider of the 21st century, “knowing your customers” was no longer a suggested course of action. Based on the requirements of legislative landmarks such as the USA PATRIOT Act 2002, modern Know Your Customer (KYC) compliance mandates were created to simultaneously combat money laundering and the funding of terrorist activities.

What is Know Your Customer (KYC)?


Know Your Customer, or KYC, refers to the regulatory compliance mandate imposed on financial service providers to implement a Customer Identification Programme and perform due diligence checks before doing business with a person or entity.

KYC fulfils a risk mitigation function, and one its key requirements is checking that a prospective customer is not listed on any government lists for wanted money launders, known fraudsters or terrorists.

If preliminary KYC checks reveal that the person is a Politically Exposed Person (PEP), for example, Advanced Due Diligence must be done in order to ensure that the person’s source of wealth is transparent, and that he or she does not pose a reputational or financial risk in terms of their finances, public positions or associations. Beyond customer identification checks, the ongoing monitoring of transfers and financial transactions against a range of risk variables forms an integral part of the KYC compliance mandate.

But to understand the importance of KYC compliance for financial service providers better, its origins need to be examined.

Origins of Know Your Customer (KYC) compliance


The arrival of the new millennium was marred by a spate of terrorist attacks and corporate scandals that unmasked the darker features of globalisation. These events highlighted the role of money laundering in cross-border crime and terrorism, and underlined the need to clamp down on the exploitation of financial systems worldwide.

Know Your Customer (KYC) legislation was principally not absent prior to 9/11. Regulated financial service providers for a long time have been required to conduct due diligence and customer identification checks in order to mitigate their own operation risks, and to ensure a consistent and acceptable level of service.

In essence, the USA PATRIOT Act was not so much a radical departure from prior legislation as it was a firmer and more extensive articulation of existing laws. The Act would lead to the more rigorous regulation of a greater range of financial services providers, and expanded the authority of American law enforcement agencies in the fighting of terrorism, both in the USA and abroad.

In October 2001, President George W. Bush signed off the USA PATRIOT Act, effectively providing federal regulators with a new range of tools and powers for fighting terror financing and money laundering. During July 2002, the US Treasury proceeded to introduce Section 326 of the PATRIOT Act, a clause that removed some key burdens for regulators and added significant enforcement muscle to the Act.

What 9/11 changed, in essence, was the extent to which existing legislation was being implemented. Using the provisions of the earlier anti-terrorism USA Act as a foundation, it included the Financial Anti-Terrorism Act, which allowed for federal jurisdiction over foreign money launders and money laundered through foreign banks. Significantly, it is this anti-terror law that would make the creation of an Anti Money Laundering (AML) programme compulsory for all financial institutions and service providers.

Section 326 of the USA PATRIOT Act dealt specifically with the identification of new customers (“CIP regulation”), and made extensive provisions in terms of KYC and the methods employed to verify client identities.

In accordance with this piece of updated KYC legislation, federal regulators would hold financial institutions accountable for the effectiveness of their initial customer identification and ongoing KYC screening. Institutions are required to keep detailed records of the steps that were taken to verify prospective clients’ identities.

Although current KYC legislation does not yet demand the exclusion of specific types of foreign-issued identification, it recommends the usage of machine-verifiable identity documents. The ability to notify financial institutions if concerns regarding specific types of identification were to arise, combined with a risk-based approach to KYC, proved to provide a robust mechanism for addressing security concerns.

Effectively, the risk-based approach to customer due diligence grants regulated institutions a certain degree of flexibility to determine the forms of identification they will accept, and under which conditions.

KYC compliance: Implications for banks, lawyers and accounting firms


The KYC compliance mandate, for all its positive outcomes, has burdened companies and organisations with a substantial administrative obligation. Additionally, KYC compliance increasingly entails the creation of auditable proof of due diligence activities, in addition to the need for customer

8/4/2009

Quality Mobility Products

h1

The SCOOTER Store offers a complete line of high-quality power chairs, scooters, and mobility accessories. We have several scooter and motorized chair models available. With a full range of features, The SCOOTER Store's scooters and power chairs, like the motorized wheelchair, are easy-to-use, comfortable, safe and reliable.

Product availability varies by geographic location, so please check with your Mobility Consultant for more information. You can also visit us at one of our many The SCOOTER Store locations.

Accessories and Transportation Solutions

The SCOOTER Store offers many solutions for transporting your scooter or power chair to places you want to go. Products include home ramps, car lifts, electric wheelchairs and other accessories. We also have products available by special order, so please give us a call and let us help you find what you need.

 

Products and Solutions for Rehab

In 2007, The SCOOTER Store founded its Alliance Seating & Mobility division to help customers who are unable to rely on traditional power mobility equipment to meet their needs. Alliance Seating & Mobility provides patients and clients high-quality rehab equipment, service and support. Products include customized rehab equipment, custom power and manual wheelchairs, and many other products to help clients lead a better quality of life.

Please contact us to learn more about our rehab solutions and how you can work with Alliance Seating & Mobility for your rehab needs.

http://www.thescooterstore.com/products/

6/4/2009

Scanners

h1

Add Scanning Capabilites to Your Huntron Tracker Model 30 System

 

Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.
You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.
Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.
Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.


Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.

Highlights:

·         The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30

·         All Scanners have a minimum 64 pin capability

·         The Scanner II can scan up to 128 pins when the A and B channels are combined

·         The Scanner 31S use standard IDC style connectors

·         The Scanner II uses the common SCSI-2 (68 pin) style connectors

·         Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins

Selecting Accessories for your Scanner II
The Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.

 

4/4/2009

In a recession, tech gadgets become a luxury

h1

In a recession, tech gadgets become a luxury

3/3/2009
Kategori: Teknoloji

 

CNN -- Matthew Baron is one of those gizmo guys, the kind who covets all toys new and shiny.

The slumping economy has more consumers holding on to older gadgets while holding off on shiny new purchases.

The slumping economy has more consumers holding on to older gadgets while holding off on shiny new purchases.

But the Brooklyn, New York, attorney, like so many other American consumers who are watching their bank account balances, is reassessing his gadget habit.

"If I'm going to buy something, I want it to count. I want it to last," said Baron, who incidentally goes by "OMG! Ponies!" when he posts comments on Gizmodo, a popular tech and gadget blog.

So, even though he'd like to upgrade his 4½ -year-old HDTV, this cowboy's holding back the reins. And while the latest iPhone was a "must have" for Baron, he said he's "waiting to pull the trigger" on that camera he's been circling. "I just can't go out and spend $400 right now."

Ignoring what you want. Recycling the old. Fixing what can be saved. Is this the new American way when it comes to tech toys and electronics -- an industry in which new gadgets can become outdated within months?

Many consumers are hoping to make products last longer, which is keeping businesses that repair and refurbish computers and other gadgets and electronics as busy as ever.

"The percent of our business devoted to repair is definitely increasing," said Paula Baldwin, the mistress of propaganda (yes, that is her title) for Geek Squad, a consumer-electronics services company. People are seeking help "to either repair that gear or add to its functionality and what it [the product] does for them."

Scott Steinberg, publisher of DigitalTrends.com, said that function, in fact, "is the new fad."

People may need their cell phones and computers to work so they can simply get by, but they don't necessarily need the highest resolution screens, the sleekest designs and all the technological bells and whistles.

"Shiny is great, but shiny doesn't necessarily let you send that e-mail or send that text message," Steinberg said. "At the end of the day, as long as the gadget functions properly, does it have to be wrapped in white gold?"

But to hear it from Shawn DuBravac, an economist for the Consumer Electronics Association, which represents 2,200 technology companies, we're staying more true to our old selves than you might think.

"During other recessions, we could live without these technologies," he said. "Whether you're male or female, 18 or 81, chances are you'll buy a technology product this year."

People are more inclined to scrimp elsewhere -- tape a bumper to a car, for example -- than they are to go without a new cell phone, he suggested. In fact, the proportion of dollars spent on electronics versus other "durable goods," such as cars, has never been higher, he said, referencing Department of Commerce statistics.

To illustrate how strong the market remains, DuBravac pointed to the popularity of new televisions in 2008, saying that sales for LCD TVs were up 41 percent and digital TV sales, overall, were up 24 percent over the previous year.

"What he's telling you is right, but it's only half the story," said Wilson Rothman, feature editor at Gizmodo, the site "OMG! Ponies!" frequents.

While people are buying, they're paying much less, Rothman said. The Seattle, Washington, journalist believes the TV industry "kind of burned itself out" with its rock-bottom prices at the end of 2008.

"What ended up happening is after most people who wanted a TV bought a TV, the market vanished," leading to layoffs, slashed budgets and to Pioneer -- which he said currently has "the best TV on the market" -- getting out of the business.

"But the good news is everyone has an HDTV now," he added with a laugh.

Just as companies "bend over backwards to get people to buy," Rothman said the next best things are being held up in production because people can't pay for them. The OLED screens for phones and cameras, for example, aren't rolling in the way folks expected. 

"Kodak sent me an OLED photo frame," Rothman said. "A thousand dollars! I sent it right back and said, 'I'm not going to review it. If I did, I'd only spend 800 words making fun of you.' "

Not only do people want to pay less, they also want more free.

Gizmodo is seeing increased traffic for its Dealzmodo link, where visitors can find discounted games, computers, movies and more. Same for its Hobomodo link, which offers freebies -- including everything from software to teeth-whitening products and tacos.

Nice-looking teeth and food handouts may not make up for out-of-reach tech gadgets, but Rothman, who said his site's audience is made up of "college kids and nerds of all ages," is learning that such things also can't hurt.

"The only agenda we have is we love gadgets," he said, "But we're also sympathetic to consumers."
http://www.cnn.com/2009/TECH/03/02/recession.tech.gadgets/index.html